FlexKrete 102
is packaged in 5 gallon pails, and includes the catalyst and measuring bottle.







View Data Sheet


FlexPrime
is used as the primer for FlexKrete when there is damp concrete, green concrete, rusty steel or rusty rebar. It will block moisture and seal off corrosion cells. FlexPrime is packaged in 2 and 10 gallon kits.





View Data Sheet


Flex-Temp Additive
allows FlexKrete to set up as quickly as 5 minutes in moderate weather, and also allows FlexKrete to be used in temperatures as low as 0°F. FlexTemp is packaged in an 8 oz. measuring bottle with 5 ounces for each 5 gallon pail of FlexKrete.







View Data Sheet


Flex-Sealer 1000
is a water-clear seal coat, used over other coatings for protection, to enhance the color and provide gloss. It will seal and beautify, stone, brick, wood, masonry products, stamped concrete, epoxy stone and other decorative systems. It may also be used as a top coat and sealer on wood, steel, fiberglass and FlexKrete.



View Data Sheet


PolyureaSeal 100
is a 100% solids, high elongation elastomer, VOC free, pure, polyurea sealant, used in horizontal saw cut and preformed joints. With 930% elongation and a shore A hardness of 80%, it is used on concrete or asphalt in high traffic areas. Food processing, cold storage, chemical plants, parking structures, shipping and transportation and poultry and meat plants, are just a few of the recommended applications.


View Data Sheet